Manidharma Sterilizer

Approx. Rs 2 Lakh / PieceGet Latest Price

We are the manufacturers of all types of Manidharma Cylindrical Steam Sterilizer for industrial and research institute purposes and we are sited at Porur, Chennai.

The cylindrical steam sterilizer’s exterior made up of stainless steel and interior made up of mild steel with attractive painting. To tighten the lid, wing nut type system provided. Heating elements are present in the bottom as immersion type. The unit is fitted with Neoprene Rubber Gasket to ensure tight sealing.

The cylindrical steam sterilizer is tested for up to 30 Psi of hydraulic pressure to ensure safety. The cylindrical autoclave is provided with Pressure gauge, Steam release cock, spring-loaded safety valve. We also provide Pressure control switch, Digital temperature indicator controller, Outer cover stainless steel water level indicator as optional accessories.

• 250 mm x 450 mm
• 350 mm x 550 mm
• 550 mm x 750 mm
• 750 mm x 1000 mm

Approx. Rs 10,000 / UnitGet Latest Price

Manidharma Vertical Portable Steam Sterilizer: We are the manufacturers of all types of portable steam sterilizer for industrial and research institutes situated in Porur, Chennai. An essential requirement for general laboratory use, the top cover seals the Portable steam sterilizer with neoprene rubber gasket and are clamped to the lower tank by wing nut closing system. Portable steam sterilizer’s chamber made of mild steel fitted with pressure gauge up to 20 psi.

The Portable steam sterilizer has spring-loaded safety valve for pressure adjustment and a dead weight safety valve. Portable steam sterilizer has heating element that converts the water into steam that sterilizes the whole system. It is hydraulically tested up to 40 psi and is supplied with electric fitting, cord and plug to work on 220/230 volts A.C. This Portable steam sterilizer supplied complete with tripod stand.

Approx. Rs 1.25 Lakh / PieceGet Latest Price

We are the manufacturers of all types of Manidharma Stainless Steel Steam Sterilizer for industrial and research institutes situated in Porur, Chennai. We manufacture and supply stainless steel steam sterilizer made up of polished high grade stainless steel. Outer wall is made up of Stainless steel grade 316 and inner wall is made up of Stainless steel grade 304. Finely polished stainless steel outer wall coated with attractive painting. Lid is made up of stainless steel with wing nut system. Lid contains ports for pressure gauge (0 – 60 psi), spring loaded safety valve and Steam release valve.The stainless steam sterilizer is hydraulically tested up to 30 PSI as safety measure.

Sizes:

• 250 mm x 450 mm
• 550 mm x 750 mm
• 350 mm x 550 mm
• 750 mm x 1000 mm

Approx. Rs 80,000 / UnitGet Latest Price

Manidharma Cylindrical Steam Sterilizer: We are the manufacturers of all types of cylindrical sterilizer for industrial and research institute purposes and we are sited at Porur, Chennai.

The exterior of the cylindrical sterilizer is made up of stainless steel and the interior is made up of mild steel with attractive painting. To tighten the lid, wing nut type system provided. Heating elements are present in the bottom as immersion type. The unit is fitted with Neoprene Rubber Gasket to ensure tight sealing.

The cylindrical sterilizer is tested for up to 30 Psi of hydraulic pressure to ensure safety. The cylindrical autoclave is provided with Pressure gauge, Steam release cock, spring-loaded safety valve. We also provide optional accessories.

Sizes:

• 250 mm x 450mm
• 350mm x 550mm
• 550 mm x 750 mm
• 750 mm x 1000 mm

Approx. Rs 55,000 / PieceGet Latest Price

We are the manufacturers of all types ofManidharma Double Walled Steam Sterilizer for industrial and research institute usage and we are sited at Porur, Chennai.

Double walled, inner chamber 16swg thick of stainless steel sheet of grade 304, outer shell made of stainless steel. The boiler and outer shell is providing with air insulation. Lid is made of stainless steel plate and radial locking system. Lid is mounted on a central screw and is provided with best quality joint less neoprene gasket to avoid any risk and trouble free operation.

These autoclaves are fitted with paddle lifting device to open /close the lid. This Double walled steam sterilizer can be set at any pressure of 5 to 25psi. Provide with drain valve. Glass indicator fitted to indicate the water level inside the chamber. Double walled steam sterilizer is hydraulically tested up to 40 psi. Double walled steam sterilizer is available in various different sizes.

Approx. Rs 10,000 / UnitGet Latest Price

Manidharma Portable Autocalve Sterilizer: We are the manufacturers of all types portable sterilizer for industrial and research institutes situated in Porur, Chennai.

The portable sterilizer unit has spring-loaded safety valve for pressure adjustment and a dead weight safety valve. It is hydraulically tested up to 40 psi and is supplied with electric fitting, cord and plug to work on 220/230 volts A.C. This portable sterilizer size is and supplied complete with tripod stand.

Approx. Rs 75,000 / PieceGet Latest Price

Manidharma Vertical Sterilizer: We are the manufacturers of all types of vertical sterilizer for industrial and research institute usage and we are situated in Porur, Chennai.

Specifications

• Type - vertical type
• Inner Chamber - Made of 304 Stainless steel sheet with .
• Outer jacket - Made of MS finished with attractive painting
• LID & Flange - Made 304 Stainless steel plate
• Gasket - Neoprine gasket
• Level gauge - From top to bottom of the shell
• Leg Support - MS angle structure
• Bottom of the Autoclave provided with Water outlet
• Working pressure - 20 psi
• Tested pressure - Hydraulically tested up to 30 PSI as safety measure

Approx. Rs 4 Lakh / UnitGet Latest Price

Manidharma Rectangular Sterilizer is an important instrument to be present in all industries and institutions. Rectangular sterilizer we manufacture can be used for all type of materials, especially bacteriological media.

The outer chamber of Rectangular sterilizer is made up of polished Stainless steel and inner chamber made up of thick stainless steel/ mild steel. Steam generator provided separately for steam generation. Lid is mounted on a central screw and is provided with best quality joint less neoprene gasket to avoid any risk and trouble free operation. This Rectangular sterilizer is fitted with pressure gauge, safety valve, steam release valve, spring loaded safety valve etc. This Rectangular sterilizer can be set at any pressure of 5 to 25psi. Provide with drain valve.

Rectangular sterilizer is available in various different sizes.

Additional Information: