Industrial Products

Size: Based on the customers recommendation or need.

These are sturdy double walled units with outer chamber made of M.S.Sheet duly enamel painted with inner made up of anodized aluminum or S.S.Sheet. The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjuring perforated shelves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by hydraulic type capillary thermostat from ambient to 70'c + 0. 5'c. An L-shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Air ventilators are also provided on the sides of the unit. To work on 220/230 volts AC supply.

Size: based on the customers recommendation or need.
These cooling incubators are designed especially for close control of incubation/storage temperature. These are used for B. O. D tests, storage of sensitive cultures, vaccines etc, culture of bacteria microorganism and plant life, seed germination work, serum incubation studies and immunological work etc. Constructed of double walls, the exterior is made of mild steel. Flush fitting insulated door has magnetic gasket, the inner chambers made of stainless steel. The flexi glass inner door makes it possible to inspect microorganism without disturbing the temperature. The shelf position of trays is adjustable. A compartment is formed at the back of interior into which is fitted the refrigeration evaporator, heater and powerful centrifugal forced air circulator for creating positive air flow through the incubator. A hermetically sealed compressor housed below the incubator provides temperature below ambient. Built in safety thermostat prevents damage to samples in case of temperature controller malfunctioning. All controls are mounted on the top of the incubator comprising self-illuminated mains on/off switch, heat energy regulator, digital temperature indicator controller and indicating lamps.

Made Of Wooden, Mild Steel, Stainless Steel
Horizontal laminar air Flow Cabinets are designed so as to meet the requirements of US Federal Standard 209 B (Bs 5295) providing particle free air to meet class 100 (Class I) conditions.  The cabinets are fabricated out of thick board duly sunmica clad.  Interior surfaces are expoxy painted for its longer life.  The work table is made of thick board which is sunmica clad at top.  Side panels are made out of thick transparent plexi glass duly framed.  The unit is fitted with pre-filter and HEPA Filter.  Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced.  Motor of 1/4 H.P. capacity operates with minimum noise level.  The working area is illuminated by fluorescent lighting fitted to the unit.  The height of the working table provides a comfortable "sit down" working position for the operator.  To work on 220/230 volts A.C. Supply. 

Size :

Size: Based on the customers recommendation or need.

Designed for continuous shaking of solutions in 250 ml / 500 ml / 1000 ml / 5000 ml capacity. It is a compact bench type table top model with platform fitted with rubber disc mounted on ball bearing crank shafts to give on orbital motions to the flasks. Within a diameter of approx 2”  the motor is coupled be means of A V. Belt with pitch pulley and is mounted on a heavy and sturdy angle iron frame. The machine can be supplied with variable speed, to work on 0. 5 hp motor 220volts A. C. Supply.

Size: based on the customers recommendation or need.

These are sturdy double walled units with outer chamber made of m. S. Sheet duly enamel painted with inner made up of mild steel or S. S. Sheet. The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides.   inner chamber is provided with ribs for adjusting perforating shelves to convenient height. Temperature is controlled by hydraulic type capillary thermostat from ambient to 300'c + 3'c.   a dial thermometer is fitted to the unit for reading the chamber temperature. Air ventilator is also provided on the sides of the unit to work on 220/230 volts A. C. Supply. All unit are fitted with air circulation fan as a standard feature.

Borosilicate glass vessel

Mixing assembly  - HX: d 250 x 150 mm, mounting stand with safety ring,  head plate assembly, 16 port head plate, diameter 200 mm & thickness 7 mm, material – ss 316 l, 2 – height adjustable ruston impeller with 6 blades each, 3 baffles – no welding joints, materials ss 316 l

Aeration : Air sparger – l –type with micro pores, air outlet with 0. 2  filter sampling-6 mm dia sample pipe

Addition : Media triple inlet for acid, base & antifoam, heat exchanger, u-type exchanger for hot water circulation, cylindrical exchanger for cold water circulation, thermopocket for pt 100 sensor

Holders : nipple m3 / 8 x psp for ph & do sensor, nipple for foam sensor

Bio controller:

Model: hygene plus, control parameter: larger lcd display, set value vs process value bar diagram, online graphical form of all parameter, manual / auto mode, auto calibration of ph & do, user can decide lower & upper limits, computer connectivity, data logging of all parameter

Agitation- Stirrer motor pmdc, speed range – 50 – 1000 rpm, rpm display-accuracy 5 rpm

Temperature : Temperature range – ambient + 5oc to 60oc, accuracy +/ - 0. 01oc, uniformity +/ -0. 4oc

Digital display-Simultaneous display of sv & pv, feather touch keypad

PH control : PH range 2-12, accuracy +/-0. 01, uniformity +/-0. 1, auto calibration, atc (automatic temperature compensation)
manual mode operation of pumps of addition / harvesting- bnc connector
do control-do range 0-100%, selectable units’ %, accuracy +/-1%, proportional two gas mixing option (air & o2)

Auto calibration

One set point – 100% oxygen,  2nd  set point – 0% by purging nitrogen, bnc connector, manual mode of air & o2 valve opening, foam control, level base, fed batch application

Bio sensors : rpm sensor (sense actual speed of motor), pt 100 thermal sensor length – 210 mm), gel filled autoclavable polarographic ph sensor – imported, length – 225 mm   dia – 16 mm, autoclavable & refillable do sensor – imported, length – 225 mm dia – 16 mm, height adjustable foam / level sensor – autoclavable

actuators : three fixed speed peristaltic pumps, for acid, base & foam addition

Two rotameters
Range  : 0. 5 lit / min for airflow, range  : 0-1 lit / min for o2 flow, heating bath with circulation,  cooling valve, air pump 1/4 hp – oil free medical grade

Other accessories

silicon tubing – autoclavable, 2 mm dia for acid, base & foam addition, 5 mm dia for sampling & addition, 6 mm dia for hot & cold water circulation

Addition bottle

3 nos for acid, base & foam, 500 ml capacity, threaded cap with two pipe, air filter – imported autoclave & reusable air filter of 0. 2 micron size

Starter kit

Set of o – rings for all ports including head plate, lip seals, viton v- rings, align key, spanner, septum, additional micro filters & tubing.

Power supply

Voltage: 230 vac / 50 khz, power consumption: 1 kw, single / three phase.

1. Air pump - 1no.
2. Suitable stabilizer - 1no.
3. Chiller cum circulator - 1no.

Optional:

1. Suitable computer piv (assembled) - 1no.

Mixer b series has 3 types of horizontal type mixer, vertical type mixer and sun type mixer. Horizontal type mixer is for blending powder to powder, powder to pellet and pellet to pellet. Vertical type mixer is for blending pellet to pellet. Sun type mixer is for blending powder to powder, pellet to pellet and powder to pellet.

Features:

• Mixer tank is all in stainless steel.
• Vertical type mixer is polish both sides.
• Sun type mixer is 360° rotation.
• Horizontal type mixer can adjust the 15° to discharge.
• Branded product.
• Buyer's label offered.

Capacity – 30kg, 50 kg, 100kg, 250kg, 500kg
Power - 2 hp,3 hp, 5 hp, 10 hp, 15 hp (gear type of motor)
Working speed – 70 rpm
Leg supportive – ms.